Shop Inspection 1CUSTOMER BIO2PRE-WORK3POST-WORK4 Customer* First Last VIN* Year/Make/Model* Referral* Assigned Shop* Shop Phone #* PRE-WORK INSPECTIONPre-Work Inspection ResultsPrior to beginning the glass service on your vehicle, we have performed a thorough pre-inspection and have determined it is necessary to bring the following items to your attention. Please describe any pre-existing damage and mark accordingly. Be specific. Scratches/Dents/Chips Cuts/Tears Stains/Burns Missing Parts Rust/Corrosion Cracks Customer's Signature*Date* MM slash DD slash YYYY A condition was discovered before after the glass part was removed that may compromise the retention system of your glass part.Condition* Body damage to the frame (flexing) of the vehicle that will adversely affect proper glass installation. Rust/Corrosion found on the window bonding area that could adversely affect adhesion of glass to the body of the vehicle. Other Other Condition* This is described in four (4) levels of severity:Treatable 1. Light, metal discoloration, typically orange. 2. Moderate corrosion, typically has some red spots. 3. Severe, deep “pitting” dark red spot. Non-Treatable 4. Perforation from microscopic holes to loss of metal. We can treat levels 1-3 at your expense, however there is no warranty against future leakage as rust/corrosion will likely reappear. If level 4 rust/corrosion is discovered, we are unable to correct the compromised condition of the bonding area of your windshield. You will most likely need to take the vehicle to a body repair facility (body shop) to have the condition repaired at your expense. Once repaired, we can then install the glass part on the newly repaired glass opening.Customer's Signature*Date* MM slash DD slash YYYY POST-WORK INSPECTIONPost-Work Checklist Glass is clean Area surrounding vehicle is clean VIN is recorded Defrosters clear and clean Seats and dash inspected Interior of vehicle is clean Rear-view mirror attached Wipers and molding secure Tape applied, if necessary Check mechanical operation Customer's Signature*Date* MM slash DD slash YYYY PhoneThis field is for validation purposes and should be left unchanged.